32-Bit CardBus PnP 10/100Base-TX Network Adapter — FE-6550TX ( Discontinued )

FE-6550TX

TECHNICAL SPECIFICATIONS

	Model:  FE-6550TX
	Standards:  IEEE 802.3u 100Base-TX, IEEE 802.3 10Base-T, PCMCIA Release 2.1
	Bus Architecture:  32-Bit CardBus
	Connector:  RJ-45
	Data Transfer Rate:  10 or 100 Mbps (auto-negotiation)
	Duplex Mode:  Full or Half (auto-sense)
	Cables:  Category 3/4/5 UTP for 10 Mbps, Category 5 UTP for 100Mbps
	Maximum Cable Distance:  100 m
	LEDs:  100/10, Link/ACT
	Power Requirement:  +5V
	Operating Temperature:  0° to 50° C
	Humidity:  10% to 90%
	Dimension:  14 x 54 x 115 mm (H x W x D)
	EMI Rating:  FCC Class B, CE Mark

DEVICE DRIVERS

	Microsoft Windows 95/98/ME/NT4.0/2000/XP1
	Microsoft Windows for Workgroup 3.11
	NDIS 2.0 for MS LAN Manager
	NDIS 2.0 for LANtastic v6.0
	Novell NetWare Client DOS ODI
	Linux (Limited Technical Support)
	Packet Driver
	Card Enabler
	User's Manual in PDF

LAN Drivers:  FE6550TX.exe, Rev 1.40 (2000-11-02)

Note 1:  Windows XP will automatically install the 'Realtek RTL8139(A)-based PCI Fast Ethernet Adapter' for FE-6550TX.  Please be reminded that no additional files needs to be loaded/installed.

Copyright © 2001 Danpex Corporation.  All rights reserved. All information is subject to change without notice. Last updated:  October 13, 2003