Register with Us for Free Training, Technical Information and More…
Your Menu, Drivers and Specifications
Home>Products > CONVERTERS > Converter Accessories
DIN-Rail Mounting Power Kit
Product Brochure (pdf), 758KB [ Use Adobe Acrobat Reader v7.0 or up ]

The DIN-Rail Mounting Power Kit, DRK-100, allows you to power up equipment on the rail with DC output up to 7A@+5V.  Installation instructions are easy to follow.

  • Model:  DRK-100
  • AC Input:  100~250V, 47~63Hz
  • DC Output:  +5V
  • Power Dissipation:  35W
  • Certifications:  CE & UL
  • Dimension:  35 x 81 x 99mm (H x W x D)

  • Place the power on the mounting bracket
  • Align the screw holes on the bracket with the holes on both side of the power
  • Insert the 3 x 4mm screws and tighten then until they are secure
  • Make sure the power is securely mounted on the DIN-Rail
  • Connect the power cable
    • Remove the screws of -V and +V.  Then, connect the red terminal and black terminal of DC power cable to the +V and -V respectively
    • Fasten the screws
    • Remove the IN's three screws L, N, and GND
    • Connect AC power input cable to L, N, and GND, and then fasten those three screws
    • Make sure all screws are completely fastened, and then turn on the power

All rights reserved.  Last modified:  2005-01-21
All information is subject to change without notice.