Register with Us for Free Training, Technical Information and More…
Your Menu, Drivers and Specifications
Home>Products > SWITCHES > Managed Switch > GIGABIT ETHERNET
6 GbE TP + 2 GbE Dual-Media L2 Plus Managed Switch (max. 8 ports)
+ High Resolution:  GS2308B

Product Brochure (pdf), 539KB [ Use Adobe Acrobat Reader v7.0 or up ]

  • 2 Dual-Media port for flexible fiber connection
  • Support jumbo frame size up to 9K
  • IEEE 802.1x access control improve network security
  • Port Mirroring helps supervisor monitoring network
  • Supports Q-in-Q (a.k.a. Double-tag)
  • IEEE 802.1q tab-base VLAN, 4094 entries and port-base VLAN
  • IEEE 802.1d compatible, 802.1w Rapid Spanning Tree, and 802.1s Multiple Spanning Tree
  • Unknown Unicast/Broadcast/Multicast storm control
  • Multicast VLAN Registration (MVR) for IPTV
  • IP-MAC-Port binding for LAN security
  • Supports QoS (QCL/QCE) for traffic control
  • ACL based on EtherType/ARP/IPv4 for packets permit or deny, rate limitation, and port copy
  • DHCP Snooping including Option 82
  • IGMPv3 Snooping & IGMP Proxy
  • Optional SSH/SSL/TACACS+/RADIUS for security network management
  • Supports "power saving" for Green Ethernet requirement
  • Supports Link Layer Discovery Protocol (LLDP) provides a standards-based method for enabling switches to advertise themselves
  • Model:  GS2308B
  • Standard compliance:
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3ab/z 1000Base-T/1000Base-X Gigabit Ethernet
    IEEE 802.3x Flow Control capability
    ANSI/IEEE 802.3 Auto-negotiation
    IEEE 802.1q VLAN
    IEEE 802.1p
    IEEE 802.1x Access Control
    IEEE 802.1d/w/s Spanning Tree/Rapid Spanning Tree/Multiple Spanning Tree
    IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • Connectors/Slots:
    Front Panel
    — Eight (8) 10/100/1000Mbps Gigabit Ethernet RJ-45 auto MDI/MDI-X (Ports 1 to 8)
    — Two (2) SFP Slots for 1000Mbps Gigbit fiber SFP
    — One (1) RS-232 DB-9 Male console port
  • Add-on SFP (Sold Separately):
    Multi-Mode or Single-Mode (distance: 10~70km)
    Gigabit  Ethernet
  • RoHS Compliance
  • Power Saving green Ethernet requirement
  • LLDP automated devices discovery
  • Performance
    • Switching capacity:
      • 8 Gigabit Ethernet ports with non-blocking wire speed performance
      • 16Gbps switch capacity
      • 8K MAC addresses
      • Up to 9K jumbo frame
      • Unknown Unicast/Broadcast/Multicast storm suppression
      • Port Mirroring
    • VLAN
      • Port-based VLAN
      • IEEE 802.1q tag-based VLAN, up to 4K VLANs
      • Supports Q-in-Q
      • Supports MVR
    • Virtual Stacking Management (VSM)
      • Up to 16 switches can be managed via a single IP limited to any specific Danpex models
      • Virtual stacking, no extra stacking hardware is required
      • Distributed stacking, no physical central wiring closet is needed
    • Quality of Service (QoS)
      • Supports Port-based, 802.1p, and Diffserv(IPv4) QoS packet classification
      • Supports two scheduling -- WRR and Strict
      • Supports 802.1p QoS with four level priority queue
    • Bandwidth Control
      • Supports bandwidth rating per port ingress and egress rate limit 500Kbps~1000Mbps with 1Kbps increment
  • Protocol
    • LACP
      • Port trunking with 4 trunking groups
      • Up to 4 ports per group
    • Multicasting
      • Supports IGMPv3 Snooping and Proxy
  • Network Security
    • 802.1x access control for port based and MAC based authentication
    • Management Access Policy Control (ACL)
    • Isolated group
    • Access control list
    • IP-MAC-Port binding
    • DHCP Snooping including Option 82
    • SSL/SSH/TACACS+ Management (optional by Project)
  • SNMPv1,v2c Network Management
    • RFC 1213 MIB(MIB-II)
      Interface, Address Translation, IP, ICMP, TCP, UDP, & SNMP MIBs
    • RFC 1757 RMON MIB
      Statistics Group 1, History Group 2, Alarm Group 3, Event Group 9
    • RFC 1493 Bridge MIB
    • RFC 1643 Ethernet MIB
    • Enterprise MIB
  • LEDs:
    Unit — POWER, CPU
    Per TP Port — LINK/ACT, 10/100/1000
    Per SFP Port — LINK/ACT
  • Power Requirement:  100~240V AC, 50/60Hz, max 17W consumption
  • Operating Temperature:  0° to 40° C
  • Humidity:  5% to 90%
  • Dimension:  44 x 280 x 166 mm (H x W x D)
  • Safety:  FCC Class A, CE Mark Approve

All rights reserved.  Last modifed:  2012-07-02
All information is subject to change without notice.